Unsere Gummi-Metall-Puffer, auch bekannt unter der Bezeichnung "Silentblöcke", sind in verschiedenen Materialien bzw. Materialkombinationen erhältlich. Erfolgt keine andere Materialspezifikation durch unsere Kunden, wird folgender Standard angenommen:
- Elastomer: Naturkautschuk (NR), ca. 55 +/-5 Shore A (mittel)
- Metallteile: Stahl verzinkt
Folgende Materialien sind optional erhältlich:
- Shorehärte: ca. 40 +/-5 Shore A (weich), ca. 70 +/-5 Shore A (hart)
- Elastomer: NBR, CR, EPDM, SI
- Metallteile: Edelstahl V2A oder V4A, Messing
Katalog Schwingungstechnikzum Download
Produktinfos im Schnellzugriff:
Gummi-Metall-Puffer Typ A- zylindrisch, beidseitig Außengewinde
Gummi-Metall-Puffer Typ B- zylindrisch,einseitig Innen- / Außengewinde
Gummi-Metall-Puffer Typ C- zylindrisch,beidseitig Innengewinde
Gummi-Metall-Puffer Typ AT - tailliert, beidseitig Außengewinde
Gummi-Metall-Puffer Typ BT- tailliert,einseitig Innen- / Außengewinde
Gummi-Metall-Puffer Typ CT- tailliert,beidseitig Innengewinde
Gummi-Metall-Puffer Typ A, zylindrisch
- beidseitig Außengewinde
- Standardqualität: Naturkautschuk, 40 Shore A, 55 Shore A oder 70 Shore A
- Metallteile: Stahl verzinkt
- andere Materialien (NBR, CR, EPDM, SI oder Metallteile aus V2A, V4A oder Messing) und Shore-Härtenauf Anfrage
Viele Gummi-Metall-Puffer sind mit unterschiedlichen Gewindegrößen bzw. Gewindelängen lieferbar. Standardabmessungen wurden in unten stehenden Tabellen fett gedruckt.
| D (mm) | H (mm) | d (mm) | l (mm) |
| 4 | 6 | M2 | 6 |
| 6 | 7 | M2,5 | 6 |
| M3 | 4, 6, 10 | ||
| 8 | 8 | M3 | 4, 6, 10 |
| 10 | 6 | M3 M4 M5 | 4, 6, 10 6, 8, 10 10, 12, 15 |
| 8 | |||
| 10 | |||
| 15 | |||
| 18 | |||
| 11 | 11 | M4 | 6, 8, 10 |
| 12 | 10 | M4 | 6, 8, 10 |
| 13 | 8 | M4 | 6, 8, 10 |
| 26 | |||
| 15 | 4 | M3 M4 M5 M6 | 4, 6, 10 6, 8, 10 10, 12, 15 6, 8, 10, 12, 15, 18, 23 |
| 6 | |||
| 8 | |||
| 10 | |||
| 15 | |||
| 20 | |||
| 25 | |||
| 30 | |||
| 18 | 7,5 | M6 | 6, 8, 10, 12, 15, 18 |
| 8,5 | |||
| 20 | 5 | M4 M5 M6 M8 | 6, 8, 10 10, 12, 15 6, 8, 10, 12, 15, 18, 23 8, 12, 18, 20, 23, 28, 33 |
| 8 | |||
| 10 | |||
| 12 | |||
| 15 | |||
| 20 | |||
| 25 | |||
| 30 | |||
| 25 | 8 | M6 M8 | 6, 8, 10, 12, 15, 18, 23 8, 12, 18, 20, 23, 28, 33 |
| 10 | |||
| 12 | |||
| 15 | |||
| 17 | |||
| 20 | |||
| 25 | |||
| 30 | |||
| 40 |
| D (mm) | H (mm) | d (mm) | l (mm) |
| 30 | 10 | M6 M8 M10 | 6, 8, 10, 12, 15, 18, 23 6, 12, 18, 20, 23, 28, 33 10, 18, 23, 28, 33 |
| 15 | |||
| 17 | |||
| 20 | |||
| 25 | |||
| 30 | |||
| 35 | |||
| 40 | |||
| 40 | 10 | M6 M8 M10 | 6, 8, 10, 12, 15, 18, 23 8, 12, 18, 20, 23, 28, 33 10, 18, 23, 28, 33 |
| 15 | |||
| 20 | |||
| 25 | |||
| 28 | |||
| 30 | |||
| 35 | |||
| 40 | |||
| 45 | |||
| 50 | |||
| 60 | |||
| 50 | 7 | M8 M10 | 8, 12, 18, 20, 23, 28, 33 10, 18, 23, 28, 33 |
| 12 | |||
| 15 | |||
| 50 | 17 | M8 M10 M12 | 8, 12, 18, 20, 23, 28, 33 10, 18, 23, 28, 33 12, 18, 23, 27, 37 |
| 20 | |||
| 25 | |||
| 27 | |||
| 30 | |||
| 35 | |||
| 37,5 | |||
| 40 | |||
| 45 | |||
| 50 | |||
| 60 | |||
| 60 | 20 | M8 M10 M12 | 8, 12, 18,3 20, 23, 28, 33 10, 18, 23, 28, 33 12, 18, 23, 27, 37 |
| 25 | |||
| 30 | |||
| 35 | |||
| 40 | |||
| 45 | |||
| 50 | |||
| 60 |
| D (mm) | H (mm) | d (mm) | l (mm) |
| 70 | 20 | M10 M12 | 10, 18, 23, 28, 33 12, 18, 23, 27, 37 |
| 25 | |||
| 30 | |||
| 35 | |||
| 40 | |||
| 45 | |||
| 50 | |||
| 55 | |||
| 60 | |||
| 70 | |||
| 75 | 20 | M10 M12 | 10, 18, 23, 28, 33 12, 18, 23, 27, 37 |
| 25 | |||
| 30 | |||
| 35 | |||
| 40 | |||
| 45 | |||
| 50 | |||
| 55 | |||
| 60 | |||
| 70 | |||
| 80 | 17 | M12 | 12, 18, 23, 27, 37 |
| 30 | |||
| 70 | |||
| 80 | |||
| 100 | 25 | M12 M16 | 12, 18, 23, 27, 37 26, 36, 41 |
| 30 | |||
| 35 | |||
| 40 | |||
| 45 | |||
| 50 | |||
| 55 | |||
| 60 | |||
| 70 | |||
| 75 | |||
| 80 | |||
| 100 | |||
| 125 | 90 | M16 | 26, 36, 41 |
| 125 | |||
| 150 | 50 | M16 M20 | 26, 36, 41 41, 45 |
| 60 | |||
| 75 | |||
| 100 | |||
| 200 | 100 | M20 | 41, 45 |
Gummi-Metall-Puffer Typ B, zylindrisch
- einseitig Innengewinde, einseitig Außengewinde
- Standardqualität: Naturkautschuk, 40 Shore A, 55 Shore A oder 70 Shore A
- Metallteile: Stahl verzinkt
- andere Materialien (NBR, CR, EPDM oder Metallteile aus V2A, V4A) und Shore-Härtenauf Anfrage
Viele Gummi-Metall-Puffer sind mit unterschiedlichen Gewindegrößen bzw. Gewindelängen lieferbar. Standardabmessungen wurden in unten stehenden Tabellen fett gedruckt.
Mit * gekennzeichnete Abmessungen sind nicht mit allen angegebenen Gewindegrößen lieferbar. Wir bitten um Ihre Anfrage.
| D (mm) | H (mm) | d (mm) | l (mm) | t (mm) |
| 6 | 7 | M2,5 | 6 | 2 |
| M3 | 4, 6, 10 | 3 | ||
| 8 | 8 | M3 | 4, 6, 10 | 3 |
| 10 | 8* | M3 M4 M5 | 4,6, 10 6, 8,10 10, 12,15 | 3 4 5 |
| 10* | ||||
| 15 | ||||
| 18 | ||||
| 11 | 11 | M4 | 6, 8, 10 | 4 |
| 13 | 26 | M4 | 6, 8,10 | 4 |
| 15 | 8* | M3 M4 M5 M6 | 4,6, 10 6, 8,10 10, 12,15 6, 8, 10, 12, 15,18, 23 | 3 4 5 5 |
| 10* | ||||
| 15 | ||||
| 20 | ||||
| 25 | ||||
| 30 | ||||
| 20 | 10* | M4 M5 M6 M8 | 6, 8,10 10, 12,15 6, 8, 10, 12, 15,18, 23 8, 12, 18, 20,23, 28, 33 | 4 5 5 7 |
| 12 | ||||
| 15 | ||||
| 20 | ||||
| 25 | ||||
| 30 | ||||
| 25 | 12 | M6 M8 | 6, 8, 10, 12, 15,18, 23 8, 12, 18, 20,23, 28, 33 | 5 7 |
| 15 | ||||
| 17 | ||||
| 20 | ||||
| 25 | ||||
| 30 | ||||
| 40 | ||||
| 30 | 15* | M6 M8 M10 | 6, 8, 10, 12, 15, 18, 23 6, 12, 18, 20, 23, 28, 33 10, 18, 23, 28, 33 | 5 7 8 |
| 17 | ||||
| 20 | ||||
| 25 | ||||
| 30 | ||||
| 35 | ||||
| 40 |
| D (mm) | H (mm) | d (mm) | l (mm) | t (mm) |
| 40 | 15* | M6 M8 M10 | 6, 8, 10, 12, 15,18, 23 8, 12, 18, 20,23, 28, 33 10, 18, 23,28, 33 | 5 7 8 |
| 20 | ||||
| 25 | ||||
| 28 | ||||
| 30 | ||||
| 35 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 60 | ||||
| 50 | 17* | M8 M10 M12 | 8, 12, 18, 20, 23, 28, 33 10, 18, 23, 28, 33 12, 18, 23, 27, 37 | 7 8 10 |
| 20* | ||||
| 25 | ||||
| 27 | ||||
| 30 | ||||
| 35 | ||||
| 37,5 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 60 | ||||
| 60 | 20* | M8 M10 M12 | 8, 12, 18, 20, 23, 28, 33 10, 18, 23, 28, 33 12, 18, 23, 27, 37 | 7 8 10 |
| 25 | ||||
| 30 | ||||
| 35 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 60 | ||||
| 70 | 25 | M10 M12 | 10, 18, 23,28, 33 12, 18, 23, 27,37 | 8 10 |
| 30 | ||||
| 35 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 55 | ||||
| 60 | ||||
| 70 |
| D (mm) | H (mm) | d (mm) | l (mm) | t (mm) |
| 75 | 25 | M10 M12 | 10, 18, 23,28, 33 12, 18, 23, 27,37 | 8 10 |
| 30 | ||||
| 35 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 55 | ||||
| 60 | ||||
| 70 | ||||
| 80 | 30 | M12 | 12, 18, 23, 27,37 | 10 |
| 70 | ||||
| 80 | ||||
| 100 | 30 | M12 M16 | 12, 18, 23, 27,37 26, 36,41 | 10 14 |
| 35 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 55 | ||||
| 60 | ||||
| 70 | ||||
| 75 | ||||
| 80 | ||||
| 100 | ||||
| 125 | 90 | M16 | 26, 36, 41 | 14 |
| 125 | ||||
| 150 | 50 | M16 M20 | 26, 36, 41 41, 45 | 14 18 |
| 60 | ||||
| 75 | ||||
| 100 | ||||
| 200 | 100 | M20 | 41, 45 | 18 |
Gummi-Metall-Puffer Typ C, zylindrisch
- beidseitig Innengewinde
- Standardqualität: Naturkautschuk, 40 Shore A, 55 Shore A oder 70 Shore A
- Metallteile: Stahl verzinkt
- andere Materialien (NBR, CR, EPDM oder Metallteile aus V2A, V4A) und Shore-Härten auf Anfrage
Viele Gummi-Metall-Puffer sind mit unterschiedlichen Gewindegrößen bzw. Gewindelängen lieferbar. Standardabmessungen wurden in unten stehenden Tabellen fett gedruckt.
Mit * gekennzeichnete Abmessungen sind nicht mit allen angegebenen Gewindegrößen lieferbar. Wir bitten um Ihre Anfrage.
| D (mm) | H (mm) | d (mm) | l (mm) | t (mm) |
| 6 | 7 | M2,5 | 6 | 2 |
| 8 | 8 | M3 | 4, 6, 10 | 3 |
| 10 | 10* | M3 M4 M5 | 4, 6, 10 6, 8,10 10, 12,15 | 3 4 5 |
| 15 | ||||
| 18 | ||||
| 11 | 11 | M4 | 6, 8, 10 | 4 |
| 13 | 26 | M4 | 6, 8,10 | 4 |
| 15 | 10* | M3 M4 M5 M6 | 4,6, 10 6, 8,10 10, 12,15 6, 8, 10, 12, 15,18, 23 | 3 4 5 5 |
| 15 | ||||
| 20 | ||||
| 25 | ||||
| 30 | ||||
| 20 | 10* | M4 M5 M6 M8 | 6, 8,10 10, 12,15 6, 8, 10, 12, 15,18, 23 8, 12, 18, 20,23, 28, 33 | 4 5 5 7 |
| 12 | ||||
| 15 | ||||
| 20 | ||||
| 25 | ||||
| 30 | ||||
| 25 | 12 | M6 M8 | 6, 8, 10, 12, 15,18, 23 8, 12, 18, 20,23, 28, 33 | 5 7 |
| 15 | ||||
| 17 | ||||
| 20 | ||||
| 25 | ||||
| 30 | ||||
| 40 | ||||
| 30 | 15* | M6 M8 M10 | 6, 8, 10, 12, 15,18, 23 6, 12, 18, 20,23, 28, 33 10, 18, 23,28, 33 | 5 7 8 |
| 17 | ||||
| 20 | ||||
| 25 | ||||
| 30 | ||||
| 35 | ||||
| 40 |
| D (mm) | H (mm) | d (mm) | l (mm) | t (mm) |
| 40 | 15* | M6 M8 M10 | 6, 8, 10, 12, 15,18, 23 8, 12, 18, 20,23, 28, 33 10, 18, 23,28, 33 | 5 7 8 |
| 20 | ||||
| 25 | ||||
| 28 | ||||
| 30 | ||||
| 35 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 60 | ||||
| 50 | 25 | M8 M10 M12 | 8, 12, 18, 20, 23, 28, 33 10, 18, 23, 28, 33 12, 18, 23, 27, 37 | 7 8 10 |
| 27 | ||||
| 30 | ||||
| 35 | ||||
| 37,5 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 60 | ||||
| 60 | 25 | M8 M10 M12 | 8, 12, 18,3 20,23, 28, 33 10, 18, 23,28, 33 12, 18, 23, 27,37 | 7 8 10 |
| 30 | ||||
| 35 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 60 | ||||
| 70 | 25 | M10 M12 | 10, 18, 23, 28, 33 12, 18, 23, 27, 37 | 8 10 |
| 30 | ||||
| 35 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 55 | ||||
| 60 | ||||
| 70 |
| D (mm) | H (mm) | d (mm) | l (mm) | t (mm) |
| 75 | 25 | M10 M12 | 10, 18, 23,28, 33 12, 18, 23, 27,37 | 8 10 |
| 30 | ||||
| 35 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 55 | ||||
| 60 | ||||
| 70 | ||||
| 80 | 30 | M12 | 12, 18, 23, 27,37 | 10 |
| 70 | ||||
| 80 | ||||
| 100 | 30 | M12 M16 | 12, 18, 23, 27,37 26, 36,41 | 10 14 |
| 35 | ||||
| 40 | ||||
| 45 | ||||
| 50 | ||||
| 55 | ||||
| 60 | ||||
| 70 | ||||
| 75 | ||||
| 80 | ||||
| 100 | ||||
| 125 | 90 | M16 | 26, 36, 41 | 14 |
| 125 | ||||
| 150 | 50 | M16 M20 | 26, 36, 41 41, 45 | 14 18 |
| 60 | ||||
| 75 | ||||
| 100 | ||||
| 200 | 100 | M20 | 41, 45 | 18 |
- Standardqualität: Naturkautschuk, 40 Shore A, 55 Shore A oder 70 Shore A
- Metallteile: Stahl verzinkt
- andere Materialien (NBR, CR, EPDM oder Metallteile aus V2A, V4A) und Shore-Härten auf Anfrage
| D (mm) | H (mm) | ta | d (mm) | l (mm) | t (mm) |
| 10 | 8 | 4,5 | M3 | 6 | 3 |
| 10 | 10 | 8 | M4 | 8, 10, 13 | 4 |
| 15 | 15 | 12 | M4 | 8, 10, 13 | 4 |
| 20 | 15 | 14 | M6 | 10,12, 15, 18 | 5 |
| 20 | 20 | 16 | M6 | 10, 12, 15, 18 | 5 |
| 20 | 30 | 12 | M6 | 10, 12, 15, 18 | 5 |
| 25 | 20 | 18 | M8 | 15, 18, 20, 23 | 6 |
| 30 | 20 | 22 | M8 | 15, 18, 20, 23 | 6 |
| 30 | 20 | 25 | M8 | 15, 18, 20, 23 | 6 |
| 30 | 25 | 18 | M8 | 15, 18, 20, 23 | 6 |
| 35 | 15 | 31 | M6 | 15, 18 | 5 |
| 40 | 30 | 25 | M8 | 15, 18, 20, 23 | 6 |
| 40 | 30 | 33 | M8 | 15, 18, 20, 23 | 6 |
| 40 | 50 | 20 | M8 | 18, 23 | 6 |
| 50 | 30 | 42 | M10 | 18, 20, 28 | 8 |
| 57 | 45 | 25 | M10 | 18, 20, 28 | 8 |
| 57 | 45 | 44 | M10 | 18, 20, 28 | 8 |
| 60 | 60 | 49 | M10 | 18, 20, 28 | 8 |
| 70 | 53 | 45 | M12 | 28 | 10 |
| 95 | 75 | 80 | M16 | 41 | 14 |
| 180 | 75 | 148 | M20 | 34 | 18 |
Weitere Gummi-Metall-Puffer fnden Sie mit einem Klick: Gummi-Metall-Anschlagpuffer, Hohlpuffer.
Gern beantworten wir Ihre Fragen rund um unser SortimentSchwingungstechnik. Nutzen Sie einfach unserKontaktformular.
zurück zur Übersicht Schwingungstechnik
Änderungen vorbehalten.
